Máy đo tốc độ và chiều dài không tiếp xúc InteliSENS® SL mini Series là thiết bị lý tưởng cho các vật liệu có bề mặt phẳng trong dây chuyển sản xuất " roll to roll" và cut to lenght".
Ưu điểm của thiết bị:
- Không tiếp xúc, không gây mòn hoặc đánh dấu lên sản phẩm.
- Không có bộ phận chuyển động tăng độ chính xác.
- Dễ dàng cài đặt lắp đặt.
- Tín hiệu ra Pulse giống như Encoder.
- Truyền thông kỹ thuật số.
- Có thể đo độc lập hoặc kết nối PLC.
Accuracy
Factory Calibrated to better than 0.05% within the central 20% of the Depth of Field.
Repeatability of 0.02%
Measurement
Maximum Acceleration Rate of 1000m/s2 (3280ft/s2)
Measurement Rate Up to 50,000/sec (20us)
Units
Speed Measurement selectable m/min, ft/min, yd/min
Length Measurement selectable m, ft, inch, yd
Material Present
For part length measurement
Connectivity
4 Pulse Outputs
RS422 Differential Pair Pulse Outputs Configurable as Quadrature or IndexConfigurable as Quadrature or Index
Default Output 5vdc or User Input to 24vdc Max
2MHz Max Pulse Output Rate
3 Logic Inputs
Non Isolated, Normally Open (High State) Pulldown Logic Inputs Maximum Voltage: +/-30V Minimum Current 3mA
Reverse Direction, Length Hold, Display Hold, Speed Hold, Total Length
Reset, End of Reel / Batch Length Reset
Reset, End of Reel / Batch Length Reset
2 Logic Outputs
Maximum Voltage 25Vdc Current 0.1A
Gauge Ok, Object Detected, Gauge Measuring, Good Readings Low,
Gauge Temperature High, Preset Length 1, Preset Length 2
Gauge Temperature High, Preset Length 1, Preset Length 2
1 Serial I/O
RS232 Modbus Communications
USB using RS232 - USB Converter Cable
ZM4000 Printer Communications
1 CANBUS
Connects to Proton Products CDi4 Display
1 WiFi
Connect to a PC or Mobile Device and use the Proton Products Gauge
App available for iOS and Android. Ideal for gauge configuration and
diagnostics.
App available for iOS and Android. Ideal for gauge configuration and
diagnostics.
1 i-BUS
Ethernet TCP/IP Modbus is the Default Communication. Connect to a PLC using optional ProfiBus, ProfiNet, EtherNet I/P or DeviceNet.
Laser Doppler
Class 3B Visible Laser.
Wavelength 650 - 670 nm, typically 658 nm with a beam diameter of 3mm (0.12”)
Total emitted power 40mW. Power Density at Stand Off Distance 560mW/cm2
Wavelength 650 - 670 nm, typically 658 nm with a beam diameter of 3mm (0.12”)
Total emitted power 40mW. Power Density at Stand Off Distance 560mW/cm2
Electrical and Operating Requirements
Power Supply
15 - 28 Vdc
15 - 28 Vdc
Power Consumption
15 Watts
15 Watts
Operating Temerature
5c - 40c (41-104F)*
*See Accessories for High Temperature protection options5c - 40c (41-104F)*
Environmental Protection
IP 67
IP 67
Size and Weight
Height
142mm (5.6”)
Width
104mm (4.1”)
Thickness
53mm (2.1”)
Weight
3kg (6.6lbs)
All Other Sizes
